Testo Datenlogger für Temperatur

The testo 174T mini data logger for temperature has a memory capacity of up to 16 000 readings. Saved measurement data will not be lost even when the battery is empty or being replaced. You can easily see the current reading shown on the large display, along with any possible violations of limit values. The temperature sensor which is integrated into the data logger is an NTC sensor with a high level of accuracy. The temperature data logger’s measuring range goes from -30 to +70 °C. It is therefore fine to use at very low temperatures as well and is for instance suitable for temperature control in refrigerators or cold stores. Particularly practical for applications involving food (e.g. storage temperature measurement): the testo 174T mini data logger for temperature is certified to EN 12830, is HACCP-compliant and has international HACCP certification. It also has water spray and jet protection according to protection class IP 65. This enables the data logger for temperature to be left in the measuring location even when warehouses are being cleaned. Technical Data: Temperature - NTC Measuring range: -30 to +70 °C Accuracy: ±0.5 °C (-30 to +70 °C) Resolution: 0.1 °C General technical data Dimensions: 60 x 38 x 18.5 mm Operating temperature: -30 to +70 °C Protection class: IP65 Channels: 1 internal Standards: EN 12830 Battery type: 2 lithium batteries (CR2032) Battery life: 500 days (15 min measuring cycle, +25 °C) Memory: 16,000 measuring values Storage temperature: -40 to +70 °C Advantage of the set: the data logger is ready to use straight away You need a USB interface to programme and read your testo 174T mini data logger for temperature. The USB interface is already included in the scope of delivery when you purchase this set. This means you can start your temperature recording straight away! Attention: Please download the newest software version before using the USB interface for the first time. The software can be found in the download area. Delivery Scope Testo 174T mini data logger set for temperature, including USB interface for programming and reading the mini data logger, wall bracket, batteries (2 x CR 2032 lithium) and calibration protocol.